Teltonika FMT100 GPS Tracker Installation Guide

 

THIS DEVICE IS SO EASY TO FIT YOU CAN INSTALL IT YOURSELF!

Simply stick the device onto the vehicle battery and connect the red wire to the positive terminal on the battery and the black wire to the negative terminal!

(The front of the device where the 2 wires exit needs to point to the front of the vehicle for maximum detection.)

NOTES ON IGNITION SENSE

There are 2 options for detecting ignition on/off

1. Board Voltage – Device automatically detects voltage change when engine is switched on/off and sets the ignition status accordingly. (On some vehicles this feature can provide false readings such as auto stop/start technology etc in which case select option 2 (Movement sense)

2. Movement Sense – When the device detects movement it switches the ignition status to on. If the device does not sense any movement for any 3 minute period it will switch the ignition status to off.

DO NOT SELECT #1 INPUT STATE

You will need to log into the tracking platform to set the method of ignition you are using.

UNAUTHORISED MOVEMENT SETUP

The platform will automatically set up unauthorised movement alerts. To prevent false alarms from GPS drift we recommend setting the minimum control start time to 5 minutes and the minimum distance to at least 1000ft.

HARSH DRIVING MONITOR

You can alter the sensitivity for the ‘harsh driving’ alerts in the platform device settings tab.